Thursday, December 27, 2012

CVC stop signs

OFF THE WIRE
Stop Signs: Intersections

21802.  (a) The driver of any vehicle approaching a stop sign at the entrance to, or within, an intersection shall stop as required by Section 22450. The driver shall then yield the right-of-way to any vehicles which have approached from another highway, or which are approaching so closely as to constitute an immediate hazard, and shall continue to yield the right-of-way to those vehicles until he or she can proceed with reasonable safety.
(b) A driver having yielded as prescribed in subdivision (a) may proceed to enter the intersection, and the drivers of all other approaching vehicles shall yield the right-of-way to the vehicle entering or crossing the intersection.
(c) This section does not apply where stop signs are erected upon all approaches to an intersection.

Amended Ch. 623, Stats. 1988. Effective January 1, 1989.
   Stop Requirements
22450.  (a) The driver of any vehicle approaching a stop sign at the entrance to, or within, an intersection shall stop at a limit line, if marked, otherwise before entering the crosswalk on the near side of the intersection.
If there is no limit line or crosswalk, the driver shall stop at the entrance to the intersecting roadway .
(b) The driver of a vehicle approaching a stop sign at a railroad grade crossing shall stop at a limit line, if marked, otherwise before crossing the first track or entrance to the railroad grade crossing.
(c) Notwithstanding any other provision of law, a local authority may adopt rules and regulations by ordinance or resolution providing for the placement of a stop sign at any location on a highway under its jurisdiction where the stop sign would enhance traffic safety.
Amended Sec. 8, Ch. 630, Stats. 2007. Effective January 1, 2008.